675.711.81 - Ground System Engineering and Mission Operations

Space Systems Engineering
Fall 2024

Description

This course will focus on the critical functions performed by ground systems and mission operations throughout the space systems life-cycle and their integrated application. Course topics will include planning and sequencing, uplink and control, testing, real-time operations, communications, data management, data analysis, and assessment. Students will learn about end-to-end best practices that pertain to most missions and how ground systems and mission operations concepts are tailored across a diversity of missions. Examples will be presented from real space missions and programs, with assignments, special topics, and a team project focused on typical ground system engineering problems, mission operations challenges, and applied methods of technical problem resolution.

Instructors

Default placeholder image. No profile image found for Josh Albers.

Josh Albers

jalbers4@jh.edu

Course Structure

The course materials are divided into modules which can be accessed by clicking Course Modules on the left menu. A module will have several sections including the overview, content, readings, discussions, and assignments. You are encouraged to preview all sections of the module before starting. Most modules run for a period of seven (7) days, exceptions are noted in the Course Outline. You should regularly check the Calendar and Announcements for assignment due dates.

Course Topics

Ground Systems

Mission Operations

Course Goals

To provide an introduction to the systems and software engineering activities involved in the design, implementation, and deployment of ground systems that support satellite operations. To expose students to how mission operations functions are conducted with the ground system, the challenges faced by mission operations teams, and applied methods of technical problem resolution.

Course Learning Outcomes (CLOs)

Textbooks

No textbook is required for this course, but weekly reading assignments will be a part of learning the course material. 

Student Coursework Requirements

It is expected that each module will take approximately 8–12 hours per week to complete. Here is an approximate breakdown: reading the assigned sections of the texts (approximately 2–3 hours per week) as well as some outside reading, listening to the audio annotated slide presentations (approximately 1–2 hours per week), writing assignments, problem sets, lab exercises (approximately 2–3 hours per week), and continuous incremental progress on the two team projects throughout the semester (approximately 3–4 hours per week).

This course will consist of the following basic student requirements:

Preparation and Participation (15% of Final Grade Calculation)

You are responsible for carefully reading all assigned material and being prepared for discussion. 

Post your initial response to the discussion questions by the evening of day 3 for that module week. Posting a response to the discussion question is part one of your grade for module discussions (i.e. timeliness).

Part two of your grade for module discussion is your interaction (i.e. responding to classmate postings with thoughtful responses) with at least two classmates (i.e. Critical Thinking). Just posting your response to a discussion question is not sufficient; we want you to interact with your classmates. Be detailed in your postings and in your responses to your classmates' postings. Feel free to agree or disagree with your classmates. Please ensure that your postings are civil and constructive.

We will monitor module discussions and will respond to some of the discussions as discussions are posted. In some instances, we will summarize the overall discussions and post the summary for the module.

Evaluation of preparation and participation is based on contribution to discussions.

Preparation and participation is evaluated by the following grading elements:

  1. Timeliness (50%)
  2. Critical Thinking (50%)

Preparation and participation is graded as follows:


Assignments (35% of Final Grade Calculation)

Assignments will include a mix of writing assignments, lab exercises, trade studies, and walk in my shoes exercises. Include a cover sheet with your name and assignment identifier. Also include your name and a page number indicator (i.e., page x of y) on each page of your submissions.

All assignments are due according to the dates in the course Calendar.

Late submissions will be reduced by one letter grade for each week late (no exceptions without prior coordination with the instructors).

If, after submitting an assignment you are not satisfied with the grade received, you are encouraged to redo the assignment and resubmit it. If the resubmission results in a better grade, the improved grade will be substituted for the previous grade.

Assignments are evaluated by the following grading elements:

  1. Each component of assignment is answered (as described in assignment description) (20%)
  2. Writing quality and technical accuracy (30%) (Writing on assignments is expected to meet or exceed accepted graduate-level English and scholarship standards. That is, all assignments will be graded on grammar and style as well as content.)
  3. Rationale for answer is provided (20%)
  4. Examples are included to illustrate rationale (15%) (If you do not have direct experience related to a particular question, then you are to provide analogies versus examples.)
  5. Outside references are included, if applicable (15%)

Assignments are graded as follows:


PDR Team Projects (25% Ground System PDR; 25% Mission Operations PDR)

The Preliminary Design Review (PDR) team projects will be due on weeks seven and fourteen. 

The team project contains three evaluated components:

  1. PDR Checkpoints
  2. Package Evaluation
  3. Package Presentation

Each component of the team project (Checkpoint, Evaluation, Presentation) is evaluated by the following grading elements:

  1. Student preparation and participation (as described in PDR Project Description) (40%)
  2. Student technical understanding of the course project topic (as related to individual role that the student assumes and described in the PDR Project Description) (20%)
  3. Team preparation and participation (as described in PDR Project Description) (20%)
  4. Team technical understanding of the course project topic (as described in the PDR Project Description) (20%)
Course Project is graded as follows:

Grading Policy

Assignments are due according to the dates posted in your Canvas course site. You may check these due dates in the Course Calendar or the Assignments in the corresponding modules. We will strive to post grades one week after assignment due dates.

We generally do not directly grade spelling and grammar. However, egregious violations of the rules of the English language will be noted without comment. Consistently poor performance in either spelling or grammar is taken as an indication of poor written communication ability that may detract from your grade.

A grade of A indicates achievement of consistent excellence and distinction throughout the course—that is, conspicuous excellence in all aspects of assignments and discussion in every week.

A grade of B indicates work that meets all course requirements on a level appropriate for graduate academic work. These criteria apply to both undergraduates and graduate students taking the course.

EP uses a +/- grading system (see “Grading System”, Graduate Programs catalog, p. 10).

100-98 = A+

97-94 = A

93-90 = A−

89-87 = B+

86-83 = B

82-80 = B− 79-77 = C+

76-73 = C

72-70 = C−

69-67 = D+

66-63 = D

<63 = F 

Final grades will be determined by the following weighting:

Item

% of Grade

Preparation and Participation

15%

Assignments

35%

Ground System Lab Exercises [4] (10%)

 

Trade Study Assignments [2] (11%)

 

Mission Operations Writing Assignment [1] (3%)

 

Walk in My Shoes Exercises [5] (11%)

 

Ground System PDR Team Project

25%

Checkpoints [4] (5%)

 

Package Evaluation [1] (10%)

 

Presentation [1] (10%)

 

Mission Operations PDR Team Project

25%

Checkpoints [4] (5%)

 

Package Evaluation [1] (10%)

 

Presentation [1] (10%)

 

Academic Policies

Deadlines for Adding, Dropping and Withdrawing from Courses

Students may add a course up to one week after the start of the term for that particular course. Students may drop courses according to the drop deadlines outlined in the EP academic calendar (https://ep.jhu.edu/student-services/academic-calendar/). Between the 6th week of the class and prior to the final withdrawal deadline, a student may withdraw from a course with a W on their academic record. A record of the course will remain on the academic record with a W appearing in the grade column to indicate that the student registered and withdrew from the course.

Academic Misconduct Policy

All students are required to read, know, and comply with the Johns Hopkins University Krieger School of Arts and Sciences (KSAS) / Whiting School of Engineering (WSE) Procedures for Handling Allegations of Misconduct by Full-Time and Part-Time Graduate Students.

This policy prohibits academic misconduct, including but not limited to the following: cheating or facilitating cheating; plagiarism; reuse of assignments; unauthorized collaboration; alteration of graded assignments; and unfair competition. Course materials (old assignments, texts, or examinations, etc.) should not be shared unless authorized by the course instructor. Any questions related to this policy should be directed to EP’s academic integrity officer at ep-academic-integrity@jhu.edu.

Students with Disabilities - Accommodations and Accessibility

Johns Hopkins University values diversity and inclusion. We are committed to providing welcoming, equitable, and accessible educational experiences for all students. Students with disabilities (including those with psychological conditions, medical conditions and temporary disabilities) can request accommodations for this course by providing an Accommodation Letter issued by Student Disability Services (SDS). Please request accommodations for this course as early as possible to provide time for effective communication and arrangements.

For further information or to start the process of requesting accommodations, please contact Student Disability Services at Engineering for Professionals, ep-disability-svcs@jhu.edu.

Student Conduct Code

The fundamental purpose of the JHU regulation of student conduct is to promote and to protect the health, safety, welfare, property, and rights of all members of the University community as well as to promote the orderly operation of the University and to safeguard its property and facilities. As members of the University community, students accept certain responsibilities which support the educational mission and create an environment in which all students are afforded the same opportunity to succeed academically. 

For a full description of the code please visit the following website: https://studentaffairs.jhu.edu/policies-guidelines/student-code/

Classroom Climate

JHU is committed to creating a classroom environment that values the diversity of experiences and perspectives that all students bring. Everyone has the right to be treated with dignity and respect. Fostering an inclusive climate is important. Research and experience show that students who interact with peers who are different from themselves learn new things and experience tangible educational outcomes. At no time in this learning process should someone be singled out or treated unequally on the basis of any seen or unseen part of their identity. 
 
If you have concerns in this course about harassment, discrimination, or any unequal treatment, or if you seek accommodations or resources, please reach out to the course instructor directly. Reporting will never impact your course grade. You may also share concerns with your program chair, the Assistant Dean for Diversity and Inclusion, or the Office of Institutional Equity. In handling reports, people will protect your privacy as much as possible, but faculty and staff are required to officially report information for some cases (e.g. sexual harassment).

Course Auditing

When a student enrolls in an EP course with “audit” status, the student must reach an understanding with the instructor as to what is required to earn the “audit.” If the student does not meet those expectations, the instructor must notify the EP Registration Team [EP-Registration@exchange.johnshopkins.edu] in order for the student to be retroactively dropped or withdrawn from the course (depending on when the "audit" was requested and in accordance with EP registration deadlines). All lecture content will remain accessible to auditing students, but access to all other course material is left to the discretion of the instructor.